2023 / 01 / 29
The PC-Modeling process of [Aqua] is completed in 2023.01.28. A sliding sleeve is added for the 3-UU bionic joint, which can be fixed when connected with the lamp holder so that can be used as an ordinary flashlight. And plenty of the NdFeb magnet pairs are set at intervals for the sliding sleeve structure, so that the fast-sliding move can be more smooth, slow-sliding move will provide the sense of tactile, and can be stopped at any time. The bottom of the lamp is equipped with a NdFeb magnet ring, so that the amp can be adsorbed on the metal surfaces as a multi-pointing lightingtool. Finally, the surface smoothness, interference between the parts and structure feasibility were checked.
3-UU仿生关节磁吸工具灯[流]的计算机建模过程已经完成。为3-UU仿生关节增添了滑套，与灯头连接可以进行固定，从而作为普通手电筒使用。并为滑套结构阶段性设置了钕铁硼磁铁对，使得快速滑动时更加顺滑，慢速滑动时具有段落感，并可以随时停止。灯底部设置钕铁硼磁铁环，使其可以吸附在金属表面作为多指向工具灯使用。最终校验了表面光顺度、零件干涉情况与结构可行性。
